Magnetic Closure 4/6-Bottle Wine Gift Box, Red and Orange

Rigid cardboard holds four or six bottles in this wine gift box, and a magnetized flip-top lid keeps it closed. A sturdy handle, built into the top or side, makes carrying easy. Red and orange are ready-stock, but you're not stuck with those: custom logos, sizes, colors, and finishes are all possible. If you want a polished gift box without paying for a solid wooden wine box, this is where you land. Winery gift sets, retail displays, and event packaging are the main uses. Cardstock and specialty paper make up the structure, accepting hot stamping, UV printing, and embossing. Luxury unboxing feel, secure closure, and a handle that actually works, that's what you get.

Magnetic flip-top lid. The lid stays shut on its own, and opens with a clean snap. That makes the box feel more expensive than a tuck-top or sleeve.
Four or six bottle layouts. Since every bottle sits in its own cavity, the insert keeps them from knocking into each other. Pick the configuration that matches your set.
Red and orange ready-stock. These two colors are available without a full custom run, and that helps when you need boxes fast. But custom colors and printing are also supported.
Handle for carrying. A sturdy integrated handle, so the recipient can carry the box with one hand. Useful for retail and event giveaways.

Get a Quote for this box More rigid board wine boxes

Specifications

Category: Wine gift box
Bottles: 4-6

Customisation

You can print your logo on the lid, sides, or inside, and change box size or insert count to match your sets. But don't forget custom finishes: hot stamping, UV printing, and embossing are available. Pick a different color, switch from four-bottle to six-bottle layout. We also support private label packaging. Send your bottle dimensions or a sample, and we will confirm the timeline after reviewing your specifications.

How the box is built

The box is made from rigid cardboard, not solid wood, which keeps the weight down and the cost lower than a wooden wine box while still giving you a firm structure. But the outside is wrapped in specialty paper, and that takes hot stamping, UV printing, and embossing well. You can put a logo on the lid, the sides, or both. It's precise.

Plus or minus 2 mm is our control tolerance for the box body, so the lid and base line up consistently. Besides the attached flip-top lid, magnets hold it shut. Built into the top or side, depending on layout, the handle stays sturdy. Actually, the rigid card means the corners stay square and the lid does not sag.

Bottle fit and carrying

When you're picking the insert layout, know that each bottle has its own cavity, in either four or six count. They do not touch each other. Shake the loaded box for 10 seconds and there should be no movement; tilt it 45 degrees and bottles should not slide; turn it upside down and nothing should release. Those are the fit checks we use. Plus, the neck and shoulder are supported, not just the base. The handle is truly sturdy enough to carry the full box. If you are shipping these boxes, our in-house pre-shipment checks include a 1.2 m six-face drop test with bottles loaded and a stacking top load of 40 kg or more for 24 hours. It's thorough.

Where it works

This box suits winery gift sets, corporate gifting, retail shelf displays, and event packaging. With red and orange ready-stock as options, you get rapid fulfillment when brand colors match or neutral look works. Collectors looking for a reusable, easy-to-store box will benefit, but for a heavy solid-wood piece or boxes traveling long without outer carton, look at our wooden wine box or shipping box options. Keep that in mind.

Buyer questions

Can I get this box in a different color or with my own logo?

Yes. But if red and orange aren't your shades, we support custom colors and printing through hot stamping, UV, or embossing. Send your artwork or a reference, then we will produce a printed sample before mass production. It's straightforward.

Does the box protect the bottles during shipping?

Since this is a gift box, not a shipping carton, only normal handling is assumed. But when courier transit is on your horizon, ask us about adding an outer carton or extra padding. Pre-shipment drop and vibration simulations happen in-house. Still, the core box isn't meant to be the only layer. Please remember that.

Can I order a smaller quantity of the ready-stock red or orange boxes?

For ready-stock boxes, you can order in smaller quantities than full custom. With custom printing or size changes, though, a flexible MOQ applies. Just contact us with your quantity and we'll give you a clear answer, based production schedule and current stock. That's it.